Deathwatch Frag Cannon Build!!!

With the viability of Deathwatch armies in 8th Ed Warhammer 40k, it was time to get serious about adding some Deathwatch Frag Cannons to my army!  They are hard to come by, so I pilfered through my bits box, and figured out an inexpensive way to build one outta bits!!! Yes!!! So, without further adieu... her ya go!

Everyone should have a bits box, if you are a serious modeler... this is your "go to" place to kit-bash, franky-build, etc.  This is my Space Marine bits box, which is a sectioned-tackle box purchased from Wal-Mart!

You are going to need: One (1) Heavy Bolter; six to seven (6-7) Space Marine frag/crack grenade glue-ons; one (1) Heavy Bolter magazine; one (1) Orkboy Shoota; some plastic rods off of some flashing;

and some Green-Stuff!

First thing you are going to want to do, is cut the Heavy-Bolter Belt off of the gun with some clippers...

You will want to notch, or cut the Heavy Bolter magazine so that it fits into the place where the belt was attached to the Heavy Bolter (Sorry gang, I forgot to take a pic); but once that is done, you will want to start gluing the grenade packs onto the gun and magazine...

Once as that is done, clip the end of the Orkboy gun barrel off and glue it to the end of the Heavy Bolter.  Glue on the rods, and then Green-stuff the casings around the rods in!

Here is the finished Fragcannon on the right!!! On the left, is the "actual" Fragcannon produced by GW! Because the bits are all from GW products, and it is almost unrecognizable from a distance... it is totally legit for tournaments! Enjoy your build!!!

Here is another variation build on youtube that is even quicker... and while it doesn't look as authentic as mine (IMO) it still looks GREAT!

https://www.youtube.com/watch?v=HMQXttK9r60

Deathwatch Devotion!

This post was originally posted 11/18/17 but since that time I was fortunate enough to win the 2018 Independent Tournament Circuit, Warhammer 40k ITC Hobbytrack!!!

I had several very kind and gracious comments about the paint on my Deathwatch Army (Thank you all!)  An artist always appreciates the kind words!  At any rate, I don't know that anyone in the area that I live in currently knows: a) That I started this army about five years ago (2011- 6th Ed), largely due to the versatility it provided in chapter tactics by playing ALL the Space Marine Chapters, b) that it was several years PRIOR to the release of the 7th Ed Deathwatch Codex, c) It has been a true passion of mine for several reasons (which I will get into later)... for now, I thought I would share a few pics of the army on display along with a jump to more pics of the Deathwatch Fortress and army!

Movement tray/Display Piece at the Las Vegas Open 2018!

(here is the jump to more pics at Frontline Gaming!)

 The Full Army!

 Yes... I finally broke down and bought a Titan for support!

 I use the Vindicators in an "add-on" Space Marine Patrol Detachment... they are beastly!

 Characters including: Two Watch Masters Scratch Build (over fourteen bits a piece!), Watch Captain with Thunder Hammer and Storm Shield, Watch Captain Artemis, and Inquisitor Galandor Kree!

 Scout squad with Sergeant Torias Telion

Some of the kill teams with various weapons, but most of all... frag cannons! (Second row back, far right was scratch built! I'll put a post up on how to do it!)

 Every single model has a alot of personalized detail...

Including a name and chapter taken right out of the black library books, codexes, and other literature!

Thanks for taking the time to sneak a peak! Sure enjoy playing the game with so many of you!!!

(If you haven't seen "Deathwatch -- Tyranid Invasion" By Rodeo Games, Unreal Engine and GW... check it out!)

https://www.youtube.com/watch?v=ioBUh1SdWf0